Welltech FXSO Gateway In SIP V.1.2 Uživatelský manuál stáhnout pdf (Strana 36)

FXSO SIP Gateway User Manual Document Ver.: 102

Released Dec., 2004

3.7 Phone Pattern

The FXSO could generate some tones, such like the busy tone, dial tone, ring

back tone and second dial tone… etc. Users could adjust these tones or get the

detail info from this page. (see figure 3.7)

Figure 3.7: Phone Pattern

u Ring Cadence – Adjust the pattern for the cadence of the Ring tone.

Including the Frequency, On time, Off time and the gain level.

u Ring Back Tone – Adjust the pattern for the Ring Back Tone. Including the

High, Low frequency, High, Low Level, and the On, Off time.

u Busy Tone – Adjust the Busy Tone.

u Dial Tone – Adjust the parameters for the dial tone playing.

u 2

Dial Tone – Adjust the second dial tone.

u Flash Frequency – Adjust the High, Low frequency for the Flash. (unit :

ms)

The Flash will affect

the call transfer function. Users could define a range for

the low and high flash time. Before you change this range, please make sure

about that the analog phone

set could generate the flash signal in this range.

The FXS will know that is the flash signal if the flash time will in this range.

For the FXO, it will generate the flash between this range

. For example, if the

low flash time is 400ms and the high is 800

ms, the FXO will generate the

600ms for the flash time.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Žádné komentáře

Welltech FXSO Gateway In SIP V.1.2 Uživatelský manuál Strana 36